Toyota LandCruiser 100/105 Series Rear Wings
Please note the rail sides and crossbars are sold separately.
We are currently transitioning our entire product range to stainless steel. Once existing mild steel stock has sold out, it will be permanently discontinued.
Complete your roof rack setup with the Tier One Metalworks Rear Wing, designed to bolt directly to our Roof Rack Rails and create a strong and seamless finish to the rear of your vehicle.
Manufactured in 304 stainless steel and finished in our signature satin black powder coat, the rear wing enhances both the appearance and functionality of your rack. It connects to the side rails using two mounting plates, increasing rigidity while creating a clean, integrated finish.
Please note: The rear wing is not self-supporting and must be mounted to one of our rear wing crossbars or directly to your rooftop tent. It is designed exclusively for use with Tier One Metalworks products and cannot be installed on its own.
TAIL GATE OR BARN DOOR?
We've developed two options to suit both tail gate and barn door setups, allowing you to choose the configuration that best suits your vehicle. Rear wings are completely optional, so your roof rack rails can be run with or without them.
Tail Gate Rear Wing
- Designed specifically for tail gate models, this shorter wing provides a clean, factory-style fit with approximately 5mm of clearance, ensuring full tailgate operation while maintaining a seamless appearance.
- Please note: The Barn Door Rear Wing is not compatible with tailgate models. Due to the different rear door design, it will interfere with tailgate setups and prevent the door from opening fully. If your vehicle has a tailgate, you must use the Tailgate Rear Wing to ensure full functionality.
Barn Door Rear Wing
- Designed specifically for barn door models, this extended wing improves both functionality and weather protection. When paired with a 270° awning, the rear wing helps bridge the gap between your awning and rooftop tent, reducing that dreaded rain gap during wet weather while providing additional support. A folded rear edge adds strength and helps direct water away from the opening, keeping your camp setup drier.
- The rear wing also doubles as a mounting point for LED strip lighting and other accessories, making it easy to expand your setup as your needs change.
SPECIFICATIONS
- Width: 1120mm at the top
- Length: (Tail Gate) 130mm / (Barn Door) 200mm from end of rails to outer edge
- Material: 2mm Stainless Steel
- Finish: Satin Black Powder Coat
- Hardware: 304 Stainless Steel
- Weight: (Tail Gate) 2.5kg / (Barn Door) 3.5kg
- Australian Designed and Manufactured
Available to purchase in a RAW stainless steel finish. Please contact our team for a quote.
FITTING INFORMATION
- Direct bolt-on fitment to Tier One Roof Rack Rails
- Creates a continuous, seamless platform between the rails
- Compatible with most rooftop tent and awning setups
Detailed Installation Instructions available below:
Please note: The rear wing is not self-supporting and must be mounted to one of our rear wing crossbars or directly to your rooftop tent. It is designed exclusively for use with Tier One Metalworks products and cannot be installed on its own.
WHAT'S INCLUDED?
- 100/105 Series LandCruiser Rear Wing (Tail Gate or Barn Door)
- 2 X Wing Mounting Plates
- Stainless Steel Mounting Hardware Kit (Including Rubber Pinch weld)
NEED HELP?
Not sure if the rear wing is right for your setup?
Get in touch with our team! We're happy to help confirm compatibility and advise whether it's best to add the rear wing now or at a later stage.
Choose options
TAIL GATE OR BARN DOOR?
We've developed two options to suit both tail gate and barn door setups, allowing you to choose the configuration that best suits your vehicle. Rear wings are completely optional, so your roof rack rails can be run with or without them.
Tail Gate Rear Wing
- Designed specifically for tail gate models, this shorter wing provides a clean, factory-style fit with approximately 5mm of clearance, ensuring full tailgate operation while maintaining a seamless appearance.
- Please note: The Barn Door Rear Wing is not compatible with tailgate models. Due to the different rear door design, it will interfere with tailgate setups and prevent the door from opening fully. If your vehicle has a tailgate, you must use the Tailgate Rear Wing to ensure full functionality.
Barn Door Rear Wing
- Designed specifically for barn door models, this extended wing improves both functionality and weather protection. When paired with a 270° awning, the rear wing helps bridge the gap between your awning and rooftop tent, reducing that dreaded rain gap during wet weather while providing additional support. A folded rear edge adds strength and helps direct water away from the opening, keeping your camp setup drier.
- The rear wing also doubles as a mounting point for LED strip lighting and other accessories, making it easy to expand your setup as your needs change.
SPECIFICATIONS
- Width: 1120mm at the top
- Length: (Tail Gate) 130mm / (Barn Door) 200mm from end of rails to outer edge
- Material: 2mm Stainless Steel
- Finish: Satin Black Powder Coat
- Hardware: 304 Stainless Steel
- Weight: (Tail Gate) 2.5kg / (Barn Door) 3.5kg
- Australian Designed and Manufactured
Available to purchase in a RAW stainless steel finish. Please contact our team for a quote.
FITTING INFORMATION
- Direct bolt-on fitment to Tier One Roof Rack Rails
- Creates a continuous, seamless platform between the rails
- Compatible with most rooftop tent and awning setups
Detailed Installation Instructions available below:
Please note: The rear wing is not self-supporting and must be mounted to one of our rear wing crossbars or directly to your rooftop tent. It is designed exclusively for use with Tier One Metalworks products and cannot be installed on its own.
WHAT'S INCLUDED?
- 100/105 Series LandCruiser Rear Wing (Tail Gate or Barn Door)
- 2 X Wing Mounting Plates
- Stainless Steel Mounting Hardware Kit (Including Rubber Pinch weld)
NEED HELP?
Not sure if the rear wing is right for your setup?
Get in touch with our team! We're happy to help confirm compatibility and advise whether it's best to add the rear wing now or at a later stage.
100% AUSTRALIAN-MADE